HR 10 GigE hr455MXGE

The HR 10GigE series with its high-end high-resolution CMOS sensors permits making full use of the sensor bandwidth. 10GigE delivers up to 1.1 GB/s of image data with distances up to 100 m.

The clean design according to well established standards like GigE Vision, 10GigE Vision and GenICam ensure rapid integration into the final application. The camera features a rich choice of industrial hardware and software features. Burst mode enables even higher trigger frequencies.

Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.

Technical Highlights

Defect pixel correction, lens shading correction
ROI, LUT, binning, offset, gamma, auto exposure
GenICam interface with GenTL driver
Integrated 4-channel power LED strobe controller
POE (Power Over Ethernet)
M58 lens thread (F-mount optional)
Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencers and timers, RS232

Specifications
Resolution [MP]	61 MP
Resolution (h x v)	9568 x 6380 px
Frame rate (max.)	18 fps
Chroma	mono
Interface	10GigE Vision (RJ-45)
Sensor
Sensor	IMX455ALK
Manufacturer	Sony
Sensor type	Area CMOS
Shutter type	rolling shutter
Sensor size (h x v)	35.98 x 23.99 mm
Optical diagonal	43.24 mm
Sensor format	43.3mm (Type 2.7)
Pixel size (h x v)	3.76 x 3.76 µm
Camera
Exposure modes	MANUAL;AUTO;EXTERNAL
Trigger modes	INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min)	34 µs
Exposure time (max)	10 sec (external ∞)
Pixel format / max	mono8, mono12, mono16 / 16 bit
Gain modes / max	manual, auto / 36 dB
S/N ratio (max)	47 dB (dep. on environment)
Dynamic range (max)	81.4 dB (dep. on environment)
Internal memory	512 MB SDRAM
Feature Set
LUT	yes
Offset	yes
Binning	yes
Image flip	yes
Shading correction	yes (external)
Defect pixel correction	yes
Sequencer	yes
POE	yes (POE+)(optional)
Housing
Lens mount	M58x0.75
Dimensions (w x h x d)	70 x 70 x 78.4 mm
Weight	420 g
Ambient temperature	-10 to 45 °C
Ambient humidity	10 to 90 % (non-condensing)
Protection class	IP30
Filter-/Coverglass	N-BK7 - AR coating
I/O-Interfaces
Input up to 24V	2 x
Input OPTO	1 x
Output open drain	4 x
I/O RS-232	1 x
Power supply	10 to 25 V (DC)
Power consumption	18 W (dep. on operating mode)