skip to main content

EXO Camera Link exo183MCL

The EXO with Camera Link interface combines state-of-the-art sensors with the advantages of Camera Link and at the same time offers very direct access to the sensor. Existing and proven infrastructures can also be further expanded in this way. The solid, CNC-milled unibody housing offers excellent temperature management and allows an operating temperature of up to 60°C for most sensors.

Power supply with Power over Camera Link. External power supply is recommended when using the integrated 4-channel LED strobe controller.

Technical Highlights

  • Thermally optimized aluminium unibody housing
  • High data rate via Camera Link Base (with PoCL)
  • Integrated 4-channel LED strobe controller
  • IO interface with 2xIN, 4xOUT, opto and RS232
  • with SafeTrigger, programmable timers, logic functions (PLC) and sequencer
  • Binning, lookup tables, ROI
  • Up to 60°C operating temperature
  • 4 integrated LED controllers
  • integrated sequencer
  • safe trigger technology
  • burst mode technology
  • programmable logic control
Resolution [MP] 20.2 MP
Resolution (h x v) 5488 x 3672 px
Frame rate (max.) 12 fps (1X3-1Y) 8 fps (1X2-1Y)
Chroma mono
Interface Camera Link Base
Sensor IMX183CLK
Manufacturer Sony
Sensor type Area CMOS
Shutter type rolling shutter
Sensor size (h x v) 13.17 x 8.81 mm
Optical diagonal 15.85 mm
Sensor format 1 "
Pixel size (h x v) 2.4 x 2.4 µm
Exposure modes MANUAL;AUTO
Exposure time (min) 228 µs
Exposure time (max) 10 sec
Pixel format / max mono8, mono12 / 12 bit
Gain modes / max manual, auto / 27 dB
S/N ratio (max) 40 dB (dep. on environment)
Dynamic range (max) 71.5 dB (dep. on environment)
Pixel clock 85 MHz
Internal memory 256 MB SDRAM, 32 MB Flash
Feature Set
AOI yes
LUT yes
Offset yes
Binning yes
Sequencer yes
Lens mount C-Mount
Dimensions (w x h x d) 50 x 50 x 42.7 mm
Weight 140 g
Operating temperature (housing) -10 to 60 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP40
Filter-/Coverglass K9 - AR coating - 400-850nm
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 4 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector


Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics

camera specific downloads

Technical drawings
Software Archive

general downloads

Image brochure
RMA Form
Quick Start Manuals
Product Overviews

Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you: