skip to main content

EXO Camera Link exo267MCL

The EXO with Camera Link interface combines state-of-the-art sensors with the advantages of Camera Link and at the same time offers very direct access to the sensor. Existing and proven infrastructures can also be further expanded in this way. The solid, CNC-milled unibody housing offers excellent temperature management and allows an operating temperature of up to 60°C for most sensors.

Power supply with Power over Camera Link. External power supply is recommended when using the integrated 4-channel LED strobe controller.

Technical Highlights

  • Thermally optimized aluminium unibody housing
  • High data rate via Camera Link Base (with PoCL)
  • Integrated 4-channel LED strobe controller
  • IO interface with 2xIN, 4xOUT, opto and RS232
  • with SafeTrigger, programmable timers, logic functions (PLC) and sequencer
  • Binning, lookup tables, ROI
  • Up to 60°C operating temperature
exo267MCL
  • 4 integrated LED controllers
  • integrated sequencer
  • safe trigger technology
  • burst mode technology
  • programmable logic control
Specifications
Resolution [MP] 8.8 MP
Resolution (h x v) 4096 x 2160 px
Frame rate (max.) 28 fps (1X3-1Y) 18 fps (1X2-1Y)
Chroma mono
Interface Camera Link Base
(MDR)
Sensor
Sensor IMX267LLR
Manufacturer Sony
Sensor type Area CMOS
Shutter type global shutter
Sensor size (h x v) 14.13 x 7.45 mm
Optical diagonal 15.98 mm
Sensor format 1 "
Pixel size (h x v) 3.45 x 3.45 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 29 µs
Exposure time (max) 10 sec (external ∞)
Pixel format / max mono8, mono12 / 12 bit
Gain modes / max manual, auto / 18 dB
S/N ratio (max) 39 dB (dep. on environment)
Dynamic range (max) 72 dB (dep. on environment)
Pixel clock 85 MHz
Internal memory 256 MB SDRAM, 32 MB Flash
Feature Set
Offset yes
Binning yes
Image flip yes
Shading correction yes (external)
Defect pixel correction yes
Sequencer yes
Housing
Lens mount C-Mount
Dimensions (w x h x d) 50 x 50 x 43 mm
Weight 140 g
Operating temperature (housing) -10 to 60 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP40
Filter-/Coverglass K9 - AR coating - 400-850nm
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 4 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics

camera specific downloads

3D CAD
Technical drawings
Manuals
Accessories
Software
Software Archive
Certificates
Firmware

general downloads

Image brochure
RMA Form
WhitePaper
Quick Start Manuals
Product Overviews

Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you:

Contact