fxo487MXGE Industrial Camera

Our ultraviolet cameras are based on the proven design of the FXO series. The Sony Pregius UV image sensors are characterized by high resolution, dynamic range and sensitivity in the 200 – 400 nm range.

Signal voltages, temperature stability, I/O control, integrated strobe controller and firmware features are targeted at applications in demanding industrial automation.

Technical Highlights:

GenICam 3.0 Software Interface, GenTL
LUT, Binning, ROI
Electrical and optical inputs
Up to 60°C operating temperature
Industrial TTL-24V I/O interface with SafeTrigger, logic functions, programmable sequencers and timers, RS232 interface, integrated 4-channel strobe controller

SWIR / UV / Polarized Series	fxo487MXGE
Resolution [MP]	8.1 MP
Resolution (h x v)	2840 x 2840 px
Frame rate (max.)	87 fps
Chroma	UV
Interface	10GigE (RJ-45)
Sensor
Sensor	IMX487-AAMJ-C
Manufacturer	Sony
Sensor type	Area UV CMOS
Shutter type	global shutter
Sensor size (h x v)	7.78 x 7.78 mm
Optical diagonal	11 mm
Sensor format	11.1mm (Type 2/3)
Pixel size (h x v)	2.74 x 2.74 µm
Camera
Exposure modes	MANUAL;AUTO
Trigger modes	INTERNAL;SOFTWARE;EXTERNAL
Pixel format / max	mono8, mono12 / 12 bit
Gain modes	manual, auto
Internal memory	1024 MB SDRAM, 256 MB Flash
Feature Set
AOI	yes
LUT	yes
Offset	yes
Binning	yes
Image flip	yes
Shading correction	yes (external)
Defect pixel correction	yes
Sequencer	yes
POE	yes
PTP	yes
Data Storage	yes optional
Housing
Lens mount	C-Mount
Dimensions (w x h x d)	50 x 50 x 76.1 mm
Weight	240 g
Operating temperature (housing)	-10 to 60 °C
Ambient humidity	10 to 90 % (non-condensing)
Protection class	IP30
I/O-Interfaces
Input up to 24V	2 x
Input OPTO	1 x
Output open drain	4 x
I/O RS-232	1 x
Power supply	10 to 25 V (DC)
Power consumption	8.5 W (dep. on operating mode)