• 4 integrated LED controllers
  • integrated sequencer
  • Safe Trigger Technology
  • programmable logic control

High interface bandwidth is one of the properties of the HR series. An advantage of the Dual GigE models is the reliable, cost-effective transmission of the image data over a distance of more than 100 m with standard network technology. A thermically optimized housing permits a wide range of lenses. Thus, the HR delivers unique picture quality. The clean design according to well established standards like GigE Vision and GenICam ensures rapid integration into the final application.

The camera features a rich choice of industrial I/O features. The burst mode permits extremely high trigger frequencies without image artifacts. Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.

Technical Highlights:
  • CCD models with 14 bit AD converter, 8 or 12 bit transmission and sophisticated tap balancing
  • Defect pixel, lens shading correction
  • ROI, LUT, binning, gamma, offset
  • Burst mode for higher trigger frequencies
  • GigE Vision GenICam interface with GenTL driver
  • Integrated multi channel LED strobe controller
  • Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencer, timer, RS232
  • M58 lens interface (F-Mount optional)

HR Series

hr16MGE-7

Resolution 4864 x 3232 px
Frame rate (max.) 8.8 fps
Chroma mono
Interface Dual GigE Vision
Sensor
Sensor KAI-16070-A
Manufacturer ON Semiconductor
Sensor type Area CCD
Shutter type global shutter
Sensor architecture interline transfer
Readout type progressive scan
Sensor size (h x v) 35.99 x 23.92 mm
Optical diagonal 43.22 mm
Sensor format 35 mm
Pixel size (h x v) 7.4 x 7.4 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 22 µs
Exposure time (max) 1 sec (external ∞)
Pixel format / max mono8, mono12 / 12 bit
Gain modes / max manual, auto / 18 dB
Dynamic range 62 dB (dep. on environment)
Internal memory 256 MB SDRAM, 160 MB Flash
Feature Set
AOI yes
LUT yes
Offset yes
Binning yes
Shading correction yes (external)
Defect pixel correction yes
Tap balancing manual;auto
Sequencer yes
Housing
Lens mount M58x0.75
Dimensions (w x h x d) 70 x 70 x 58.8 mm
Weight 320 g
Ambient temperature -10 to 45 °C
Protection class IP40
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 10 W (dep. on operating mode)

Dimensions [mm]

dimensions frontdimensions backdimensions leftdimensions rightdimensions topdimensions bottomcross section

Pinout

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics

camera specific downloads

Manuals

Current Software

Software Archive

Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you: