• 4 integrated LED controllers
  • integrated sequencer
  • Safe Trigger Technology
  • programmable logic control

The HR 10 GigE series with its high-end high-resolution CCD and CMOS sensors permits making full use of the sensor bandwidth. 10 GigE delivers up to 1.1 GB/s of image data with distances up to 100m .

The clean design according to well established standards like GigE Vision, 10 GigE Vision and GenICam ensure rapid integration into the final application. The camera features a rich choice of industrial hardware and software features. Burst mode enables even higher trigger frequencies.

Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.

Technical Highlights:
  • Sophisticated tap balancing (CCD only)
  • Defect pixel correction, lens shading correction
  • ROI, LUT, binning, gamma, offset, autoexposure
  • Burst mode for high trigger frequency
  • GenICam interface with GenTL driver
  • Integrated multi channel LED strobe controller
  • Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencer and timer, RS232
  • M58 lens interface (F-Mount optional)

HR Series

hr25CXGE

Resolution 5120 x 5120 px
Frame rate (max.) 42 fps
Chroma color
Interface 10GigE
Sensor
Sensor NOIP1SE025KA-GDI
Manufacturer ON Semiconductor
Sensor type Area CMOS
Shutter type global shutter
Sensor size (h x v) 23.04 x 23.04 mm
Optical diagonal 32.58 mm
Sensor format 35 mm
Pixel size (h x v) 4.5 x 4.5 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 21 µs
Exposure time (max) 1 sec (external ∞)
Pixel format / max bayer8, bayer12 / 12 bit
Gain modes / max manual, auto / 18 dB
Pixel clock 0 MHz
Internal memory 512 MB SDRAM, 160 MB Flash
Feature Set
Manual white balance yes
Automatic white balance yes
LUT yes
Offset yes
Binning yes
Image flip yes
Shading correction yes (external)
Defect pixel correction yes
Sequencer yes
Housing
Lens mount M58x0.75
Dimensions (w x h x d) 70 x 70 x 58.8 mm
Weight 320 g
Ambient temperature -10 to 45 °C
Protection class IP30
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 10 W (dep. on operating mode)

Dimensions [mm]

dimensions frontdimensions backdimensions leftdimensions rightdimensions topdimensions bottomcross section

Pinout

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics

Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you: