skip to main content

HR Camera Link hr25MCL

Camera Link offers high data rates, deterministic time response and very direct access to the image sensor. This also enables industrial cameras with the highest resolutions, settings and operating modes that are not available with other interfaces.

The clear design, based on established standards (GenICam, GenTL), allows rapid integration into the application. The camera offers a wide range of industrial hardware and software features.

With its high resolutions, the HR series is ideal for surface control, quality control and flat panel inspection.

Technical Highlights

  • Defect pixel correction
  • LUT, gamma, offset
  • ROI and binning (not for: hr49, hr65)
  • Integrated multi-channel LED strobe controller
  • Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencer, timer, RS232
  • Power over Camera Link (PoCL)
hr25MCL
  • 4 integrated LED controllers
  • integrated sequencer
  • safe trigger technology
  • programmable logic control
Specifications
Resolution [MP] 25 MP
Resolution (h x v) 5120 x 5120 px
Frame rate (max.) 31.8 fps (1X10-1Y) 25 fps (1X8-1Y)
Chroma mono
Interface Camera Link 80-Bit
SDR
Sensor
Sensor NOIP1SN025KA-GDI
Manufacturer ON Semiconductor
Sensor type Area CMOS
Shutter type global shutter
Sensor size (h x v) 23.04 x 23.04 mm
Optical diagonal 32.58 mm
Sensor format APS-H (32,58mm)
Pixel size (h x v) 4.5 x 4.5 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 21 µs
Exposure time (max) 10 sec (external ∞)
Pixel format / max bayer8, bayer10 / 10 bit
Gain modes / max manual, auto / 18 dB
Pixel clock 85 MHz
Internal memory 512 MB SDRAM, 160 MB Flash
Feature Set
LUT yes
Offset yes
Binning yes
Image flip yes
Shading correction yes (external)
Defect pixel correction yes
Sequencer yes
Housing
Lens mount M58x0.75
Dimensions (w x h x d) 70 x 70 x 56.3 mm
Weight 420 g
Operating temperature (housing) -10 to 65 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP40
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 10 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics

camera specific downloads

3D CAD
Technical drawings
Manuals
Accessories
Software
Software Archive
Tools
Certificates
Firmware

general downloads

Image brochure
RMA Form
WhitePaper
Quick Start Manuals
Product Overviews

Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you:

Contact