skip to main content

HR 10 GigE hr342MXGE

The HR 10GigE series with its high-end high-resolution CCD and CMOS sensors permits making full use of the sensor bandwidth. 10GigE delivers up to 1.1 GB/s of image data with distances up to 100m.

The clean design according to well established standards like GigE Vision, 10GigE Vision and GenICam ensure rapid integration into the final application. The camera features a rich choice of industrial hardware and software features. Burst mode enables even higher trigger frequencies.

Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.

Technical Highlights

  • Defect pixel correction, lens shading correction
  • ROI, LUT, binning, offset, gamma, auto exposure
  • GenICam interface with GenTL driver
  • Integrated 4-channel power LED strobe controller
  • POE (Power Over Ethernet)
  • M58 lens thread (F-mount optional)
  • Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencers and timers, RS232
  • 4 integrated LED controllers
  • integrated sequencer
  • safe trigger technology
  • burst mode technology
  • programmable logic control
Resolution [MP] 31.4 MP
Resolution (h x v) 6464 x 4852 px
Frame rate (max.) 35.4 fps
Chroma mono
Interface 10GigE
Sensor IMX342LLA
Manufacturer Sony
Sensor type Area CMOS
Shutter type global shutter
Sensor size (h x v) 22.3 x 16.74 mm
Optical diagonal 27.88 mm
Sensor format 27.9mm (APS-C)
Pixel size (h x v) 3.45 x 3.45 µm
Exposure time (min) 19 µs
Exposure time (max) 10 sec (external ∞)
Pixel format / max mono8, mono12 / 12 bit
Gain modes / max manual, auto / 48 dB
S/N ratio (max) 39.9 dB (dep. on environment)
Dynamic range (max) 70.5 dB (dep. on environment)
Internal memory 512 MB SDRAM, 32 MB Flash
Feature Set
LUT yes
Offset yes
Binning yes
Image flip yes
Shading correction yes (external)
Defect pixel correction yes
Sequencer yes
POE yes (POE+)(optional)
Lens mount M58x0.75
Dimensions (w x h x d) 70 x 70 x 79.8 mm
Weight 400 g
Ambient temperature -10 to 45 °C
Protection class IP30
Filter-/Coverglass N-BK7 - AR coating
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 16 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector


Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics

camera specific downloads

Technical drawings
Product Overviews

Here you can find all product sheets, factsheets, drivers and other information material on the SVS-VISTEK SVCam cameras in an overview.

Software Archive

general downloads

Image brochure
RMA Form
Quick Start Manuals
Product Overviews

Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you: