goto main content

hr43MCL HR Camera Link

  • 4 integrated LED controllers
  • integrated sequencer
  • Safe Trigger Technology
  • burst mode technology
  • programmable logic control

Camera Link has its advantages regarding data transfer speed, a deterministic timing and very direct access to the imaging sensor itself. Thus, it permits settings and operating modes that are not available with other interfaces. HR series with Camera Link provides a wide range of unique camera core features.

A sophisticated I/O interface provides a rich choice of industrial hardware and software features, including a GenICam multichannel LED strobe control. Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.

Technical Highlights:
  • User defined defect pixel correction
  • Lens shading correction
  • ROI, LUT, binning, gamma, offset
  • Integrated multichannel LED strobe controller
  • Industrial TTL-24V I/O interface with Safe Trigger, programmable logic functions, sequencer, timer, RS232
  • Power over Camera Link (PoCL)

HR Series

hr43MCL

Resolution [MP] 43 MP
Resolution (h x v) 8040 x 5360 px
Frame rate (max.) 4 fps
Chroma mono
Interface Camera Link 80-Bit
SDR
Sensor
Sensor KAI-43140-AXA-JD
Manufacturer ON Semiconductor
Sensor type Area CCD
Shutter type global shutter
Sensor architecture interline transfer
Readout type progressive scan
Sensor size (h x v) 36.18 x 24.12 mm
Optical diagonal 43.48 mm
Sensor format 35mm
Pixel size (h x v) 4.5 x 4.5 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 22 µs
Exposure time (max) 1 sec (external ∞)
Pixel format / max mono8, mono12 / 12 bit
Gain modes / max manual, auto / 18 dB
Internal memory 256 MB SDRAM, 160 MB Flash
Feature Set
AOI yes
LUT yes
Offset yes
Binning yes
Shading correction yes (external)
Defect pixel correction yes
Tap balancing manual;auto
Sequencer yes
PIV yes
Housing
Lens mount M58x0.75
Dimensions (w x h x d) 70 x 70 x 57.8 mm
Weight 320 g
Ambient temperature -10 to 45 °C
Protection class IP40
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)

Dimensions [mm]

Pinout Mating Connector

Pinout
camera specific downloads

3D CAD

Tech. Drawings

Manuals

Product Overviews

Here you can find all product sheets, factsheets, drivers and other information material on the SVS-VISTEK SVCam cameras in an overview.

Accessories

Software

Software Archive

Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you: