skip to main content

HR 10 GigE hr455CXGE

The HR 10GigE series with its high-end high-resolution CMOS sensors permits making full use of the sensor bandwidth. 10GigE delivers up to 1.1 GB/s of image data with distances up to 100 m.

The clean design according to well established standards like GigE Vision, 10GigE Vision and GenICam ensure rapid integration into the final application. The camera features a rich choice of industrial hardware and software features. Burst mode enables even higher trigger frequencies.

Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.

Technical Highlights

  • Defect pixel correction, lens shading correction
  • ROI, LUT, binning, offset, gamma, auto exposure
  • GenICam interface with GenTL driver
  • Integrated 4-channel power LED strobe controller
  • POE (Power Over Ethernet)
  • M58 lens thread (F-mount optional)
  • Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencers and timers, RS232
hr455CXGE
  • 4 integrated LED controllers
  • integrated sequencer
  • safe trigger technology
  • programmable logic control
Specifications
Resolution [MP] 61 MP
Resolution (h x v) 9568 x 6380 px
Frame rate (max.) 18 fps
Chroma color
Interface 10GigE Vision
(RJ-45)
Sensor
Sensor IMX455AQK
Manufacturer Sony
Sensor type Area CMOS
Shutter type rolling shutter
Sensor size (h x v) 35.98 x 23.99 mm
Optical diagonal 43.24 mm
Sensor format 43.3mm (Type 2.7)
Pixel size (h x v) 3.76 x 3.76 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 34 µs
Exposure time (max) 10 sec (external ∞)
Pixel format / max bayer8, bayer12, bayer16 / 16 bit
Gain modes / max manual, auto / 36 dB
S/N ratio (max) 47 dB (dep. on environment)
Dynamic range (max) 81.4 dB (dep. on environment)
Internal memory 512 MB SDRAM
Feature Set
Manual white balance yes
Automatic white balance yes
LUT yes
Offset yes
Binning yes
Image flip yes
Shading correction yes (external)
Defect pixel correction yes
Sequencer yes
POE yes (POE+)(optional)
Housing
Lens mount M58x0.75
Dimensions (w x h x d) 70 x 70 x 78.4 mm
Weight 420 g
Ambient temperature -10 to 45 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP30
Filter-/Coverglass N-BK7 - AR coating
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 18 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics

camera specific downloads

3D CAD
Technical drawings
Manuals
Accessories
Software
Software Archive
Certificates
Firmware

general downloads

Image brochure
RMA Form
WhitePaper
Quick Start Manuals
Product Overviews

Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you:

Contact