• 4 integrated LED controllers
  • integrated sequencer
  • Safe Trigger Technology
  • burst mode technology
  • programmable logic control

The HR 10 GigE series with its high-end high-resolution CCD and CMOS sensors permits making full use of the sensor bandwidth. 10 GigE delivers up to 1.1 GB/s of image data with distances up to 100m .

The clean design according to well established standards like GigE Vision, 10 GigE Vision and GenICam ensure rapid integration into the final application. The camera features a rich choice of industrial hardware and software features. Burst mode enables even higher trigger frequencies.

Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.

Technical Highlights:
  • Defect pixel correction, lens shading correction
  • ROI, LUT, binning, gamma, offset, autoexposure
  • GenICam interface with GenTL driver
  • Integrated multi channel LED strobe controller
  • POE (Power Over Ethernet) single cable option
  • Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencer and timer, RS232
  • M58 lens interface (F-Mount optional)

HR Series

hr65CXGE

Resolution [MP] 65 MP
Resolution (h x v) 9344 x 7000 px
Frame rate (max.) 17.4 fps
Chroma color
Interface 10GigE
Sensor
Sensor GMAX3265-BVC
Manufacturer Gpixel
Sensor type Area CMOS
Shutter type global shutter
Sensor size (h x v) 29.9 x 22.4 mm
Optical diagonal 37.36 mm
Sensor format 37.4mm
Pixel size (h x v) 3.2 x 3.2 µm
Camera
Exposure modes MANUAL;AUTO
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 62 µs
Exposure time (max) 1 sec
Pixel format / max bayer8, bayer12 / 12 bit
Gain modes manual, auto
S/N ratio (max) 40 dB (dep. on environment)
Dynamic range (max) 65.6 dB (dep. on environment)
Internal memory 512 MB SDRAM, 32 MB Flash
Feature Set
Manual white balance yes
Automatic white balance yes
AOI yes
LUT yes
Offset yes
Binning yes
Image flip yes
Sequencer yes
POE yes (POE+)(optional)
Housing
Lens mount M58x0.75
Dimensions (w x h x d) 70 x 70 x 75.9 mm
Weight 420 g
Operating temperature (housing) -10 to 65 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP30
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 15 W (dep. on operating mode)

Dimensions [mm]

all dimensions in mmall dimensions in mmall dimensions in mmall dimensions in mmall dimensions in mmall dimensions in mmall dimensions in mm

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics

camera specific downloads

3D CAD

Tech. Drawings

Current Software

Manuals

Software Archive

Accessories

Firmware

Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you: