print
close
Contact
hr387MXGE
HR 10 GigE
The HR 10GigE series with its high-end high-resolution CCD and CMOS sensors permits making full use of the sensor bandwidth. 10GigE delivers up to 1.1 GB/s of image data with distances up to 100m.
The clean design according to well established standards like GigE Vision, 10GigE Vision and GenICam ensure rapid integration into the final application. The camera features a rich choice of industrial hardware and software features. Burst mode enables even higher trigger frequencies.
Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.
Technical Highlights
- > Defect pixel correction, lens shading correction
- > ROI, LUT, binning, gamma, offset, auto exposure
- > GenICam interface with GenTL driver
- > Integrated multichannel LED strobe controller
- > POE (Power Over Ethernet) single cable option
- > Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencer and timer, RS232
- > M58 lens interface (F-Mount optional)
HR Series |
hr387MXGE |
| Resolution [MP] | 16.7 MP |
| Resolution (h x v) | 5440 x 3076 px |
| Frame rate (max.) | 56.4 fps |
| Chroma | mono |
| Interface | 10GigE (RJ-45) |
| Sensor | |
| Sensor | IMX387LLA |
| Manufacturer | Sony |
| Sensor type | Area CMOS |
| Shutter type | global shutter |
| Sensor size (h x v) | 18.77 x 10.61 mm |
| Optical diagonal | 21.56 mm |
| Sensor format | 21.7mm (4/3) |
| Pixel size (h x v) | 3.45 x 3.45 µm |
| Camera | |
| Exposure modes | MANUAL;AUTO;EXTERNAL |
| Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
| Exposure time (min) | 21 µs |
| Exposure time (max) | 1 sec (external ∞) |
| Pixel format / max | mono8, mono12 / 12 bit |
| Gain modes / max | manual, auto / 18 dB |
| Internal memory | 512 MB SDRAM, 32 MB Flash |
| Feature Set | |
| LUT | yes |
| Offset | yes |
| Binning | yes |
| Image flip | yes |
| Shading correction | yes (external) |
| Defect pixel correction | yes |
| Sequencer | yes |
| POE | yes (POE+)(optional) |
| Housing | |
| Lens mount | M58x0.75 |
| Dimensions (w x h x d) | 70 x 70 x 79.8 mm |
| Weight | 400 g |
| Ambient temperature | -10 to 45 °C |
| Protection class | IP30 |
| Filter-/Coverglass | N-BK7 - AR coating 380-850nm |
| I/O-Interfaces | |
| Input up to 24V | 2 x |
| Input OPTO | 1 x |
| Output open drain | 4 x |
| I/O RS-232 | 1 x |
| Power supply | 10 to 25 V (DC) |
| Power consumption | 15.5 W (dep. on operating mode) |
Dimensions [mm]
Pinout Mating Connector
Spectral Response *
* Sensor data – excludes camera cover- or IR-cut filter characteristics