The high resolution SHR series offers outstanding image quality. This is made possible by the excellent physical characteristics of large pixels in large format sensors. The thermally highly optimized housing guarantees highest optical precision. The large M72 lens mount can be adapted to any lens. The economical and high-performance 10GigE interface offers high data transfer speeds of up to 1.1 GB/s for these large images. A special frame grabber is not required.
SHR Series |
shr461MXGE |
Resolution [MP] | 101.8 MP |
Resolution (h x v) | 11648 x 8742 px |
Frame rate (max.) | 8.7 fps |
Chroma | mono |
Interface | 10GigE (RJ-45) |
Sensor | |
Sensor | IMX461LLA |
Manufacturer | Sony |
Sensor type | Area CMOS |
Shutter type | rolling shutter |
Sensor size (h x v) | 43.8 x 32.87 mm |
Optical diagonal | 54.76 mm |
Sensor format | 55mm (Type 3.4) |
Pixel size (h x v) | 3.76 x 3.76 µm |
Camera | |
Exposure modes | MANUAL;AUTO;EXTERNAL |
Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
Exposure time (min) | 60 µs |
Exposure time (max) | 1 sec (external ∞) |
Pixel format / max | mono8, mono12, mono16 / 16 bit |
Gain modes / max | manual, auto / 36 dB |
Internal memory | 512 MB SDRAM |
Feature Set | |
LUT | yes |
Offset | yes |
Binning | yes |
Image flip | yes |
Shading correction | yes (external) |
Defect pixel correction | yes |
Sequencer | yes |
POE | yes (POE+)(optional) |
Housing | |
Lens mount | M72x0,75 |
Dimensions (w x h x d) | 80 x 80 x 83 mm |
Weight | 580 g |
Ambient temperature | -10 to 45 °C |
Ambient humidity | 10 to 90 % (non-condensing) |
Protection class | IP30 |
Filter-/Coverglass | Borofloat B270i - AR coating |
I/O-Interfaces | |
Input up to 24V | 2 x |
Input OPTO | 1 x |
Output open drain | 4 x |
I/O RS-232 | 1 x |
Power supply | 10 to 25 V (DC) |
Power consumption | 17 W (dep. on operating mode) |
* Sensor data – excludes camera cover- or IR-cut filter characteristics