SHR – Series
Broader field - Finer details
The SHR brings out even the finest details, offering significant benefits for inspection of large surfaces. Ideal for solving tasks within wafer, solar panel and display inspection. The SHR 47 simply provides megapixels with superb image quality.
47 megapixel precision - Made in Germany
The ON Semiconductor KAI-47051 CCD sensor boasts a 5.5 µm pixel pitch, 56.7 mm image diagonal and 7 frames/second at maximum data rate.
The SHR features an M72 lens mount. The short flange back distance of 19.55 mm allows individual adaptation of high performance lens systems for virtually any task. Our guarantee for the best results with this sensor.
SHR – Camera Link
Enhance existing Camera Link architectures seamlessly, the SHR significantly boost bandwidth capability with the Camera Link 80-bit Full upgrade.
Employing as many as 16 taps, the sensor delivers its 47 megapixels in the finest CCD quality. The unique tap balancing, devised by SVS-VISTEK, is renowned for being among the best - worldwide. It ensures effortless integration of the camera in your application.
Camera Link specific:
|Resolution||8856 x 5280 px|
|Frame rate (max.)||7 fps (X2-2YE) 28 fps (1X2-1Y)|
|Interface||Camera Link Medium|
|Sensor type||Area CCD|
|Shutter type||global shutter|
|Sensor architecture||interline transfer|
|Readout type||progressive scan|
|Sensor size (h x v)||48.71 x 29.04 mm|
|Optical diagonal||56.71 mm|
|Sensor format||Medium Format|
|Pixel size (h x v)||5.5 x 5.5 µm|
|Exposure time (min)||28 µs|
|Exposure time (max)||1 sec (external ∞)|
|Pixel format / max||mono8, mono12 / 12 bit|
|Gain modes / max||manual, auto / 18 dB|
|S/N ratio||42.6 dB (dep. on environment)|
|Dynamic range||62 dB (dep. on environment)|
|Pixel clock||85 MHz|
|Internal memory||256 MB SDRAM, 160 MB Flash|
|Shading correction||yes (external)|
|Defect pixel correction||yes|
|Dimensions (w x h x d)||80 x 80 x 63.6 mm|
|Ambient temperature||-10 to 45 °C|
|Ambient humidity||10 to 90 % (non-condensing)|
|Input up to 24V||2 x|
|Input OPTO||1 x|
|Output open drain||4 x|
|I/O RS-232||1 x|
|Power supply||10 to 25 V (DC)|
|Power consumption||15 W (dep. on operating mode)|
* Sensor data – excludes camera cover- or IR-cut filter characteristics