goto main content

hr51MXGE HR 10 GigE

  • 4 integrated LED controllers
  • integrated sequencer
  • Safe Trigger Technology
  • burst mode technology
  • programmable logic control

The HR 10GigE series with its high-end high-resolution CCD and CMOS sensors permits making full use of the sensor bandwidth. 10GigE delivers up to 1.1 GB/s of image data with distances up to 100m.

The clean design according to well established standards like GigE Vision, 10GigE Vision and GenICam ensure rapid integration into the final application. The camera features a rich choice of industrial hardware and software features. Burst mode enables even higher trigger frequencies.

Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.

Technical Highlights:
  • Defect pixel correction, lens shading correction
  • ROI, LUT, binning, gamma, offset, auto exposure
  • GenICam interface with GenTL driver
  • Integrated multichannel LED strobe controller
  • POE (Power Over Ethernet) single cable option
  • Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencer and timer, RS232
  • M58 lens interface (F-Mount optional)

HR Series

hr51MXGE

Resolution [MP] 51 MP
Resolution (h x v) 8424 x 6032 px
Frame rate (max.) 23.7 fps
Chroma mono
Interface 10GigE
(RJ-45)
Sensor
Sensor GMAX4651
Manufacturer Gpixel
Sensor type Area CMOS
Shutter type global shutter
Sensor size (h x v) 38.75 x 27.75 mm
Optical diagonal 47.66 mm
Sensor format 35mm Full Frame
Pixel size (h x v) 4.6 x 4.6 µm
Camera
Exposure modes MANUAL;AUTO
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 17 µs
Exposure time (max) 1 sec
Pixel format / max mono8, mono12 / 12 bit
Gain modes manual, auto
S/N ratio (max) 42.6 dB (dep. on environment)
Dynamic range (max) 65 dB (dep. on environment)
Internal memory 512 MB SDRAM
Feature Set
AOI yes
LUT yes
Offset yes
Binning yes
Image flip yes
Shading correction yes (external)
Defect pixel correction yes
Sequencer yes
POE yes (POE+)(optional)
Housing
Lens mount M58x0.75
Dimensions (w x h x d) 70 x 70 x 76.8 mm
Weight 380 g
Ambient temperature -10 to 45 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP30
Filter-/Coverglass N-BK7 - AR coating 380-850nm
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 17 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics

camera specific downloads

3D CAD

Tech. Drawings

Manuals

アクセサリー

Software

Software Archive

Certificates

Firmware

Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you: