print close Contact

fxo990MCX

SWIR

The SWIR cameras based on the EXO and FXO series offer an extremely wide usable spectral range of 400-1700nm with the Sony SenSWIR sensor. Highly efficient thermal management of the housing is the basis of the outstanding dynamic range and homogeneity of the image. The integrated 4-channel strobe controller supports complex illumination and analysis scenarios.

Technical Highlights

  • >  Switchable active cooling (FXO only)
  • >  GenICam 3.0, GenTL
  • >  Integrated 4-channel LED strobe controller
  • >  I/O interface with 2xIN, 4xOUT, Opto and RS232
  • >  programmable timer, logic functions and sequencer
  • >  Two-Point NUC (Non Uniformity Correction) (new SDK SVCam Kit 2.5.13 needed)

 

ATTENTION: This product is subject to export control and requires written information on intended use and final destination!


SVS-Vistek GmbH - Ferdinand-Porsche-Str. 3 - 82205 Gilching - Germany - Telephone +49 8105 3987-60
Information accurate as to: 20.04.2024, errors and omissions excepted.
© 2024 – SVS-Vistek GmbH, all rights reserved.

SWIR / UV / Polarized Series

fxo990MCX

Resolution [MP] 1.3 MP
Resolution (h x v) 1280 x 1024 px
Frame rate (max.) 134 fps
Chroma SWIR
Interface CXP-12 with 1 Connection
(micro-BNC)
Sensor
Sensor IMX990AABJ
Manufacturer Sony
Sensor type Area SWIR CMOS
Shutter type global shutter
Sensor size (h x v) 6.4 x 5.12 mm
Optical diagonal 8.2 mm
Sensor format 8.2mm (Typ 1/2)
Pixel size (h x v) 5 x 5 µm
Camera
Exposure modes MANUAL;AUTO
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 15 µs
Exposure time (max) 0.5 sec
Pixel format / max mono8, mono12 / 12 bit
Gain modes manual, auto
Dynamic range (max) 57 dB (dep. on environment)
Internal memory 1024 MB SDRAM, 256 MB Flash
Feature Set
AOI yes
LUT yes
Offset yes
Binning yes
Image flip yes
Two-Point NUC yes
Defect pixel correction yes
Sequencer yes
PoCXP yes
Dynamic HotPixel Correction yes
Housing
Lens mount C-Mount
Dimensions (w x h x d) 50 x 50 x 70.1 mm
Weight 240 g
Operating temperature (housing) -10 to 65 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP30
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 7 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics


SVS-Vistek GmbH - Ferdinand-Porsche-Str. 3 - 82205 Gilching - Germany - Telephone +49 8105 3987-60
Information accurate as to: 20.04.2024, errors and omissions excepted.
© 2024 – SVS-Vistek GmbH, all rights reserved.