print close Contact

hr16070MFLCPC (EOL)

HR Camera Link

hr16070MFLCPC

Camera Link has its advantages regarding data transfer speed, a deterministic timing and very direct access to the imaging sensor itself. Thus, it permits settings and operating modes that are not available with other interfaces. HR series with Camera Link provides a wide range of unique camera core features.

A sophisticated I/O interface provides a rich choice of industrial hardware and software features, including a GenICam multichannel LED strobe control. Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.

Technical Highlights

  • >  User defined defect pixel correction
  • >  Lens shading correction
  • >  ROI, LUT, binning, gamma, offset
  • >  Integrated multichannel LED strobe controller
  • >  Industrial TTL-24V I/O interface with Safe Trigger, programmable logic functions, sequencer, timer, RS232
  • >  Power over Camera Link (PoCL)

SVS-Vistek GmbH - Ferdinand-Porsche-Str. 3 - 82205 Gilching - Germany - Telephone +49 8105 3987-60
Information accurate as to: 29.03.2024, errors and omissions excepted.
© 2024 – SVS-Vistek GmbH, all rights reserved.
(EOL)

HR Series

hr16070MFLCPC (EOL)

Resolution [MP] 16 MP
Resolution (h x v) 4864 x 3232 px
Frame rate (max.) 10.2 fps
Chroma mono
Interface Camera Link Medium
Sensor
Sensor KAI-16070-A
Manufacturer ON Semiconductor
Sensor type Area CCD
Shutter type global shutter
Sensor architecture interline transfer
Readout type progressive scan
Sensor size (h x v) 35.99 x 23.92 mm
Optical diagonal 43.22 mm
Sensor format 35 mm
Pixel size (h x v) 7.4 x 7.4 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 20 µs
Exposure time (max) 60 sec (external ∞)
Pixel format / max mono8, mono12 / 12 bit
Gain modes / max manual, auto / 18 dB
Dynamic range (max) 64 dB (dep. on environment)
Pixel clock 48 MHz
Internal memory 128 MB SDRAM, 136 MB Flash
Feature Set
AOI yes
LUT yes
Offset yes
Binning yes
Defect pixel correction yes
Tap balancing manual;auto
Sequencer yes
PIV yes
Housing
Lens mount M58x0,75
Dimensions (w x h x d) 70 x 71 x 55.4 mm
Weight 420 g
Ambient temperature -10 to 45 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP30
I/O-Interfaces
Input up to 24V 2 x
Output open drain 2 x
I/O RS-232 1 x
I/O RS-422 1 x
Power supply 10 to 25 V (DC)
Power consumption 10 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics


SVS-Vistek GmbH - Ferdinand-Porsche-Str. 3 - 82205 Gilching - Germany - Telephone +49 8105 3987-60
Information accurate as to: 29.03.2024, errors and omissions excepted.
© 2024 – SVS-Vistek GmbH, all rights reserved.
(EOL)