print close Contact

hr25CCL

HR Camera Link

Camera Link has its advantages regarding data transfer speed, a deterministic timing and very direct access to the imaging sensor itself. Thus, it permits settings and operating modes that are not available with other interfaces. HR series with Camera Link provides a wide range of unique camera core features.

A sophisticated I/O interface provides a rich choice of industrial hardware and software features, including a GenICam multichannel LED strobe control. Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.

Technical Highlights

  • >  User defined defect pixel correction
  • >  Lens shading correction
  • >  ROI, LUT, binning, gamma, offset
  • >  Integrated multichannel LED strobe controller
  • >  Industrial TTL-24V I/O interface with Safe Trigger, programmable logic functions, sequencer, timer, RS232
  • >  Power over Camera Link (PoCL)

SVS-Vistek GmbH - Ferdinand-Porsche-Str. 3 - 82205 Gilching - Germany - Telephone +49 8105 3987-60
Information accurate as to: 29.03.2024, errors and omissions excepted.
© 2024 – SVS-Vistek GmbH, all rights reserved.

HR Series

hr25CCL

Resolution [MP] 25 MP
Resolution (h x v) 5120 x 5120 px
Frame rate (max.) 31.8 fps (1X10-1Y) 25 fps (1X8-1Y)
Chroma color
Interface Camera Link 80-Bit
SDR
Sensor
Sensor NOIP1SE025KA-GDI
Manufacturer ON Semiconductor
Sensor type Area CMOS
Shutter type global shutter
Sensor size (h x v) 23.04 x 23.04 mm
Optical diagonal 32.58 mm
Sensor format APS-H (32,58mm)
Pixel size (h x v) 4.5 x 4.5 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 21 µs
Exposure time (max) 1 sec (external ∞)
Pixel format / max bayer8, bayer10 / 10 bit
Gain modes / max manual, auto / 18 dB
Pixel clock 85 MHz
Internal memory 512 MB SDRAM, 160 MB Flash
Feature Set
Manual white balance yes
Automatic white balance yes
LUT yes
Offset yes
Binning yes
Image flip yes
Shading correction yes (external)
Defect pixel correction yes
Sequencer yes
Housing
Lens mount M58x0.75
Dimensions (w x h x d) 70 x 70 x 56.3 mm
Weight 420 g
Operating temperature (housing) -10 to 65 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP40
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 10 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics


SVS-Vistek GmbH - Ferdinand-Porsche-Str. 3 - 82205 Gilching - Germany - Telephone +49 8105 3987-60
Information accurate as to: 29.03.2024, errors and omissions excepted.
© 2024 – SVS-Vistek GmbH, all rights reserved.