주요 콘텐츠로 이동

EXO GigE exo545MGE

Form follows requirements

With uniform size and standard interfaces comes simple inter­change­ability, allowing the system integrator to easily adapt a solution to varying conditions and requirements - with minimal design effort. SVS-Vistek meets precisely these needs. The EXO series is a perfect match with its uniform form factor and feature set, combined with industry standard interfaces. A solution for virtually every case, allowing smooth and effortless up- or downscaling. Once designed in, the implementations can be varied endlessly.

SVCam EXO series cameras with GigE Vision interface give your applications an extreme scalability. Quick and easy hardware interchangeability results in shorter design cycles and reduced development costs. Further value is added to your application by a virtually limitless feature set. As an example, the 4I/O LED driver with standardized software control.

기술 하이라이트

  • IO interface with 2xIN, 4xOUT, Opto and RS232
  • integrated 4-channel power strobe controller for direct LED control
  • SafeTrigger, programmable timers, logic functions (PLC) and sequencer
  • progressive scan/global shutter sensors
  • POE (Power Over Ethernet) single-cable option
  • Burst mode, ROI, binning, lookup tables
  • SDK for Windows (32/64 bit), Linux
  • GenICam standard with GenTL driver
  • up to 120 MB/s data rate, up to 100m cable length
  • broadcast-safe
exo545MGE
  • 4 integrated LED controllers
  • integrated sequencer
  • safe trigger technology
  • burst mode technology
  • programmable logic control
Specifications
Resolution [MP] 12.3 MP
Resolution (h x v) 4096 x 3000 px
Frame rate (max.) 10 fps
Frame rate burst mode (max.) 23 fps
Chroma mono
Interface GigE Vision
(RJ-45)
Sensor
Sensor IMX545LLA
Manufacturer Sony
Sensor type Area CMOS
Shutter type global shutter
Sensor size (h x v) 11.22 x 8.22 mm
Optical diagonal 13.91 mm
Sensor format 14mm (Type 1/1.1)
Pixel size (h x v) 2.74 x 2.74 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 28 µs
Exposure time (max) 10 sec (external ∞)
Pixel format / max mono8, mono12packed / 12 bit
Gain modes manual, auto
S/N ratio (max) 39 dB (dep. on environment)
Dynamic range (max) 72 dB (dep. on environment)
Internal memory 256 MB SDRAM, 32 MB Flash
Feature Set
AOI yes
LUT yes
Offset yes
Readout control yes
Binning yes
Image flip yes
Shading correction yes
Defect pixel correction yes
Sequencer yes
POE yes
PTP yes
Housing
Lens mount C-Mount
Dimensions (w x h x d) 50 x 50 x 42.5 mm
Weight 140 g
Operating temperature (housing) -10 to 60 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP40
Filter-/Coverglass K9 - AR coating - 400-850nm
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 4.5 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* 센서 데이터 - 카메라 커버 또는 IR 차단 필터 특성 제외

카메라 관련 다운로드

3D CAD
기술 도면
Manuals
액세서리
Software
Software Archive
Certificates
Firmware

일반 다운로드

이미지 브로셔
RMA Form
WhitePaper
Quick Start Manuals
제품 개요

오퍼 및 추가 정보 요청하기

이 카메라에 대한 제안을 원하시거나 질문이 있거나 조언이 필요하신가요? 소니 전문가가 기꺼이 도와드리겠습니다:

연락처