The EXO Tracer is an industrial camera with a fully functional lens control (focus, zoom, aperture). Lens mount is a Micro Four Thirds (MFT) mount. The excellent thermal concept of the EXO qualifies for a operating temperature of up to 60°C.
The MFT beam geometry on the sensor side of the lens works in perfect harmony to the high sensitive Sony IMX sensors. A nearly perfect flatfield is the compelling result. Together with up to 72dB dynamic range and up to 20 MP resolution, the Tracer delivers excellent image quality.
Lens control and integrated strobe controller are integrated into the camera's GenICam 3.0 tree as properties. Any GenICam-driven software is immediately able to use lens control and strobe controller without additional drivers.
Rich set of features
EXO Series |
exo387MU3TR |
Resolution [MP] | 16.8 MP |
Resolution (h x v) | 5456 x 3076 px |
Frame rate (max.) | 22 fps |
Chroma | mono |
Interface | USB3 Vision (Micro-B) |
Sensor | |
Sensor | IMX387LLA |
Manufacturer | Sony |
Sensor type | Area CMOS |
Shutter type | global shutter |
Sensor size (h x v) | 18.82 x 10.61 mm |
Optical diagonal | 21.61 mm |
Sensor format | 21.7mm (4/3) |
Pixel size (h x v) | 3.45 x 3.45 µm |
Camera | |
Exposure modes | MANUAL;AUTO;EXTERNAL |
Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
Exposure time (min) | 41 µs |
Exposure time (max) | 1 sec (external ∞) |
Pixel format / max | mono8, mono12packed / 12 bit |
Gain modes / max | manual, auto / 48 dB |
S/N ratio (max) | 39.9 dB (dep. on environment) |
Dynamic range (max) | 70.5 dB (dep. on environment) |
Internal memory | 256 MB SDRAM, 32 MB Flash |
Feature Set | |
AOI | yes |
LUT | yes |
Offset | yes |
Binning | yes |
Image flip | yes |
Shading correction | yes |
Defect pixel correction | yes |
Sequencer | yes |
Housing | |
Lens mount | MFT |
Dimensions (w x h x d) | 58 x 58 x 53.7 mm |
Weight | 320 g |
Operating temperature (housing) | -10 to 65 °C |
Ambient humidity | 10 to 90 % (non-condensing) |
Protection class | IP40 |
Filter-/Coverglass | K9 - AR coating |
I/O-Interfaces | |
Input up to 24V | 2 x |
Input OPTO | 1 x |
Output open drain | 4 x |
I/O RS-232 | 1 x |
Power supply | 10 to 25 V (DC) |
Power consumption | 8 W (dep. on operating mode) |
* Sensor data – excludes camera cover- or IR-cut filter characteristics