Form follows requirements
With uniform size and standard interfaces comes simple interchangeability, allowing the system integrator to easily adapt a solution to varying conditions and requirements - with minimal design effort. SVS-Vistek meets precisely these needs. The EXO series is a perfect match with its uniform form factor and feature set, combined with industry standard interfaces. A solution for virtually every case, allowing smooth and effortless up- or downscaling. Once designed in, the implementations can be varied endlessly.
SVCam EXO series cameras with GigE Vision interface give your applications an extreme scalability. Quick and easy hardware interchangeability results in shorter design cycles and reduced development costs. Further value is added to your application by a virtually limitless feature set. As an example, the 4I/O LED driver with standardized software control.
EXO Series |
exo541MGE |
Resolution [MP] | 20.3 MP |
Resolution (h x v) | 4504 x 4504 px |
Frame rate (max.) | 6 fps |
Frame rate burst mode (max.) | 15 fps |
Chroma | mono |
Interface | GigE Vision (RJ-45) |
Sensor | |
Sensor | IMX541LLA |
Manufacturer | Sony |
Sensor type | Area CMOS |
Shutter type | global shutter |
Sensor size (h x v) | 12.34 x 12.34 mm |
Optical diagonal | 17.45 mm |
Sensor format | 17.5mm (Type 1.1) |
Pixel size (h x v) | 2.74 x 2.74 µm |
Camera | |
Exposure modes | MANUAL;AUTO;EXTERNAL |
Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
Exposure time (min) | 28 µs |
Exposure time (max) | 1 sec (external ∞) |
Pixel format / max | mono8, mono12packed / 12 bit |
Gain modes | manual, auto |
Dynamic range (max) | 72 dB (dep. on environment) |
Internal memory | 256 MB SDRAM, 32 MB Flash |
Feature Set | |
AOI | yes |
LUT | yes |
Offset | yes |
Readout control | yes |
Binning | yes |
Image flip | yes |
Shading correction | yes |
Defect pixel correction | yes |
Sequencer | yes |
POE | yes |
PTP | yes |
Housing | |
Lens mount | C-Mount |
Dimensions (w x h x d) | 50 x 50 x 42.5 mm |
Weight | 140 g |
Operating temperature (housing) | -10 to 65 °C |
Ambient humidity | 10 to 90 % (non-condensing) |
Protection class | IP40 |
Filter-/Coverglass | K9 - AR coating - 400-850nm |
I/O-Interfaces | |
Input up to 24V | 2 x |
Input OPTO | 1 x |
Output open drain | 4 x |
I/O RS-232 | 1 x |
Power supply | 10 to 25 V (DC) |
Power consumption | 4.5 W (dep. on operating mode) |
* Sensor data – excludes camera cover- or IR-cut filter characteristics