Camera Link has its advantages regarding data transfer speed, a deterministic timing and very direct access to the imaging sensor itself. Thus, it permits settings and operating modes that are not available with other interfaces. HR series with Camera Link provides a wide range of unique camera core features.
A sophisticated I/O interface provides a rich choice of industrial hardware and software features, including a GenICam multichannel LED strobe control. Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.
HR Series |
hr49CCL (preliminary) |
Please note: This product is preliminary. Technical specifications might change. |
|
Resolution [MP] | 49 MP |
Resolution (h x v) | 7008 x 7000 px |
Frame rate (max.) | 17 fps |
Chroma | color |
Interface | Camera Link 80-Bit SDR |
Sensor | |
Sensor | GMAX3265-49 |
Manufacturer | Gpixel |
Sensor type | Area CMOS |
Shutter type | global shutter |
Sensor size (h x v) | 22.43 x 22.4 mm |
Optical diagonal | 31.7 mm |
Sensor format | 37.4mm |
Pixel size (h x v) | 3.2 x 3.2 µm |
Camera | |
Exposure modes | MANUAL;AUTO;EXTERNAL |
Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
Exposure time (min) | 21 µs |
Exposure time (max) | 1 sec (external ∞) |
Pixel format / max | bayer8, bayer10 / 10 bit |
Gain modes | manual, auto |
Internal memory | 512 MB SDRAM, 160 MB Flash |
Feature Set | |
Manual white balance | yes |
Automatic white balance | yes |
LUT | yes |
Offset | yes |
Shading correction | yes (external) |
Defect pixel correction | yes |
Sequencer | yes |
Housing | |
Lens mount | M58x0.75 |
Dimensions (w x h x d) | 70 x 70 x 75.9 mm |
Weight | 420 g |
Ambient temperature | -10 to 45 °C |
Protection class | IP30 |
I/O-Interfaces | |
Input up to 24V | 2 x |
Input OPTO | 1 x |
Output open drain | 4 x |
I/O RS-232 | 1 x |
Power supply | 10 to 25 V (DC) |
Power consumption | 7.8 W (dep. on operating mode) |
* Sensor data – excludes camera cover- or IR-cut filter characteristics