print close Contact

shr461MXGE

SHR 10GigE

The high resolution SHR series offers outstanding image quality. This is made possible by the excellent physical characteristics of large pixels in large format sensors. The thermally highly optimized housing guarantees highest optical precision. The large M72 lens mount can be adapted to any lens. The economical and high-performance 10GigE interface offers high data transfer speeds of up to 1.1 GB/s for these large images. A special frame grabber is not required.

Technical Highlights

  • >  User defined shading correction
  • >  Automatic and user defined pixel correction
  • >  Extremely low noise
  • >  Excellent dynamic range
  • >  high performance 10GigE interface
  • >  Integrated 4-channel LED strobe controller
  • >  Industrial TTL-24V I/O Interface with Safe Trigger, programmable logic functions, sequencers and timers, RS232

SVS-Vistek GmbH - Ferdinand-Porsche-Str. 3 - 82205 Gilching - Germany - Telephone +49 8105 3987-60
Information accurate as to: 28.03.2024, errors and omissions excepted.
© 2024 – SVS-Vistek GmbH, all rights reserved.

SHR Series

shr461MXGE

Resolution [MP] 101.8 MP
Resolution (h x v) 11648 x 8742 px
Frame rate (max.) 8.7 fps
Chroma mono
Interface 10GigE
(RJ-45)
Sensor
Sensor IMX461LLA
Manufacturer Sony
Sensor type Area CMOS
Shutter type rolling shutter
Sensor size (h x v) 43.8 x 32.87 mm
Optical diagonal 54.76 mm
Sensor format 55mm (Type 3.4)
Pixel size (h x v) 3.76 x 3.76 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 60 µs
Exposure time (max) 1 sec (external ∞)
Pixel format / max mono8, mono12, mono16 / 16 bit
Gain modes / max manual, auto / 36 dB
Internal memory 512 MB SDRAM
Feature Set
LUT yes
Offset yes
Binning yes
Image flip yes
Shading correction yes (external)
Defect pixel correction yes
Sequencer yes
POE yes (POE+)(optional)
Housing
Lens mount M72x0,75
Dimensions (w x h x d) 80 x 80 x 83 mm
Weight 580 g
Ambient temperature -10 to 45 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP30
Filter-/Coverglass Borofloat B270i - AR coating
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 17 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics


SVS-Vistek GmbH - Ferdinand-Porsche-Str. 3 - 82205 Gilching - Germany - Telephone +49 8105 3987-60
Information accurate as to: 28.03.2024, errors and omissions excepted.
© 2024 – SVS-Vistek GmbH, all rights reserved.