• 2 integrated LED controllers
  • integrated sequencer
  • Safe Trigger Technology
  • programmable logic control
  • Micro Four Thirds

Industrial Micro-4/3"

The SVCam-EVO "Tracer" is the first industrial camera equipped with the Micro-4/3" lens standard. By allowing full user control of zoom, focus and aperture, the lens becomes an integrated part of the camera. The Micro-4/3" lens system was pioneered by increasing demands in digital still photography. This standard, based on a bayonet mount, is widely used for compact cameras and is 100% optimized for digital image capture. There is a wide selection of suitable lenses, and more are on the way, making new and previously unthinkable solutions reality.

Technical Highlights:
  • Micro-4/3" lens adapter
  • Fast user control of zoom, aperture and focus
  • Lens settings controlled by Ethernet interface
  • progressive scan / global shutter
  • 14 Bit ADC to 8 or 12 Bit-transfer depth
  • Power supply: 10 – 25 V DC
  • Proven I/O-Concept: 2 x Input (0-24 V), 1 x Input RS-422,
  • 2 x Output (24 V, 0,3 A), 1 x Output RS-422, 1 x Serial RS-232
  • direct controle of LED light
  • 240 MB/s Datentransferrate
  • cable length up to 100 Meter
  • broadcast-safe
  • SDK for Windows (32/64 Bit) and Linux available
  • Dual GigE Vision data interface (Gigabit Ethernet Standard)
  • GigE Vision and GenIcam standards compatibility
  • Two parallel Ethernet connections enabling increased data rates
  • SDK for Windows (32/64bit) and Linux available

EVO Series


Resolution 2336 x 1752 px
Frame rate (max.) 41.6 fps
Chroma mono
Interface Dual GigE Vision
Sensor KAI-04050-A
Manufacturer ON Semiconductor
Sensor type Area CCD
Shutter type global shutter
Sensor architecture interline transfer
Readout type progressive scan
Sensor size (h x v) 12.85 x 9.64 mm
Optical diagonal 16.06 mm
Sensor format 1 "
Pixel size (h x v) 5.5 x 5.5 µm
Exposure time (min) 6 µs
Exposure time (max) 60 sec (external ∞)
Pixel format / max mono8, / 8 bit
Gain modes / max manual, / 18 dB
Dynamic range (max) 48 dB (dep. on environment)
Internal memory 128 MB SDRAM, 136 MB Flash
Feature Set
AOI yes
LUT yes
Offset yes
Readout control yes
Binning yes
Image flip yes
Shading correction yes
Defect pixel correction yes
Tap balancing manual;auto
Sequencer yes
Lens mount MFT
Dimensions (w x h x d) 58 x 58 x 59 mm
Weight 320 g
Ambient temperature -10 to 45 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP40
Input up to 24V 2 x
Output open drain 2 x
I/O RS-232 1 x
I/O RS-422 1 x
Power supply 10 to 25 V (DC)
Power consumption 7 W (dep. on operating mode)

Dimensions [mm]

all dimensions in mmall dimensions in mmall dimensions in mmall dimensions in mmall dimensions in mm

Pinout Mating Connector


Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics

camera specific downloads


Current Software

Software Archive



Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you: