跳转到主要内容

EXO GigE exo183MGE

Form follows requirements

With uniform size and standard interfaces comes simple inter­change­ability, allowing the system integrator to easily adapt a solution to varying conditions and requirements - with minimal design effort. SVS-Vistek meets precisely these needs. The EXO series is a perfect match with its uniform form factor and feature set, combined with industry standard interfaces. A solution for virtually every case, allowing smooth and effortless up- or downscaling. Once designed in, the implementations can be varied endlessly.

SVCam EXO series cameras with GigE Vision interface give your applications an extreme scalability. Quick and easy hardware interchangeability results in shorter design cycles and reduced development costs. Further value is added to your application by a virtually limitless feature set. As an example, the 4I/O LED driver with standardized software control.

技术亮点

  • IO interface with 2xIN, 4xOUT, Opto and RS232
  • integrated 4-channel power strobe controller for direct LED control
  • SafeTrigger, programmable timers, logic functions (PLC) and sequencer
  • progressive scan/global shutter sensors
  • POE (Power Over Ethernet) single-cable option
  • Burst mode, ROI, binning, lookup tables
  • SDK for Windows (32/64 bit), Linux
  • GenICam standard with GenTL driver
  • up to 120 MB/s data rate, up to 100m cable length
  • broadcast-safe
exo183MGE
  • 4 integrated LED controllers
  • integrated sequencer
  • safe trigger technology
  • burst mode technology
  • programmable logic control
Specifications
Resolution [MP] 20.2 MP
Resolution (h x v) 5496 x 3672 px
Frame rate (max.) 6 fps
Frame rate burst mode (max.) 16 fps
Chroma mono
Interface GigE Vision
(RJ-45)
Sensor
Sensor IMX183CLK
Manufacturer Sony
Sensor type Area CMOS
Shutter type rolling shutter
Sensor size (h x v) 13.19 x 8.81 mm
Optical diagonal 15.86 mm
Sensor format 1 "
Pixel size (h x v) 2.4 x 2.4 µm
Camera
Exposure modes MANUAL;AUTO
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 30 µs
Exposure time (max) 10 sec
Pixel format / max mono8, mono12packed / 12 bit
Gain modes / max manual, auto / 27 dB
S/N ratio (max) 40 dB (dep. on environment)
Dynamic range (max) 71.5 dB (dep. on environment)
Internal memory 256 MB SDRAM, 32 MB Flash
Feature Set
AOI yes
LUT yes
Offset yes
Readout control yes
Binning yes
Image flip yes
Defect pixel correction yes
Sequencer yes
POE yes
Housing
Lens mount C-Mount
Dimensions (w x h x d) 50 x 50 x 42.9 mm
Weight 140 g
Operating temperature (housing) -10 to 60 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP40
Filter-/Coverglass K9 - AR coating - 400-850nm
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 5 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* 传感器数据 - 不包括相机遮光或红外截止滤光片特性

相机专用下载

3D CAD
技术图纸
手册
辅料
Software
Software Archive
Certificates
Firmware

一般下载

图片手册
RMA Form
WhitePaper
Quick Start Manuals
产品概览

优惠和更多信息

您想获得这款相机的报价,您有问题或需要建议?我们的专家将竭诚为您服务:

联系方式