EXO GigE exo541CGE

Form follows requirements

With uniform size and standard interfaces comes simple interchangeability, allowing the system integrator to easily adapt a solution to varying conditions and requirements - with minimal design effort. SVS-Vistek meets precisely these needs. The EXO series is a perfect match with its uniform form factor and feature set, combined with industry standard interfaces. A solution for virtually every case, allowing smooth and effortless up- or downscaling. Once designed in, the implementations can be varied endlessly.

SVCam EXO series cameras with GigE Vision interface give your applications an extreme scalability. Quick and easy hardware interchangeability results in shorter design cycles and reduced development costs. Further value is added to your application by a virtually limitless feature set. As an example, the 4I/O LED driver with standardized software control.

技术亮点

IO interface with 2xIN, 4xOUT, Opto and RS232
integrated 4-channel power strobe controller for direct LED control
SafeTrigger, programmable timers, logic functions (PLC) and sequencer
progressive scan/global shutter sensors
POE (Power Over Ethernet) single-cable option
Burst mode, ROI, binning, lookup tables
SDK for Windows (32/64 bit), Linux
GenICam standard with GenTL driver
up to 120 MB/s data rate, up to 100m cable length
broadcast-safe

Specifications
Resolution [MP]	20.3 MP
Resolution (h x v)	4504 x 4504 px
Frame rate (max.)	6 fps
Frame rate burst mode (max.)	15 fps
Chroma	color
Interface	GigE (RJ-45)
Sensor
Sensor	IMX541LQA
Manufacturer	Sony
Sensor type	Area CMOS
Shutter type	global shutter
Sensor size (h x v)	12.34 x 12.34 mm
Optical diagonal	17.45 mm
Sensor format	17.5mm (Type 1.1)
Pixel size (h x v)	2.74 x 2.74 µm
Camera
Exposure modes	MANUAL;AUTO;EXTERNAL
Trigger modes	INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min)	16 µs
Exposure time (max)	10 sec (external ∞)
Pixel format / max	bayer8, bayer12packed / 12 bit
Gain modes	manual, auto
Dynamic range (max)	72 dB (dep. on environment)
Internal memory	256 MB SDRAM, 32 MB Flash
Feature Set
Manual white balance	yes
Automatic white balance	yes
AOI	yes
LUT	yes
Offset	yes
Readout control	yes
Binning	yes
Image flip	yes
Shading correction	yes
Defect pixel correction	yes
Sequencer	yes
POE	yes
PTP	yes
Color Transformation Control	yes
Housing
Lens mount	C-Mount
Dimensions (w x h x d)	50 x 50 x 42.5 mm
Weight	143 g
Operating temperature (housing)	-10 to 65 °C
Ambient humidity	10 to 90 % (non-condensing)
Protection class	IP40
Filter-/Coverglass	IR-Cut 680
I/O-Interfaces
Input up to 24V	2 x
Input OPTO	1 x
Output open drain	4 x
I/O RS-232	1 x
Power supply	10 to 25 V (DC)
Power consumption	4.5 W (dep. on operating mode)