The FXO SWIR series with CoaXPress-12 has an excellent thermal design. It provides optimal heat dissipation with dust-free cooling and a superior homogeneous image with a high dynamic range. CoaXPress-12 is one of the fastest industrial machine vision interfaces and delivers maximum image sensor bandwidth in a thermally efficient implementation. GenICam 3.0 and GenTL allow easy integration with common software packages.

The excellent image is complemented by a comprehensive set of features. Signal voltages, I/O control and firmware features are targeted at applications in industrial automation.

  • Sony SenSWIR sensor with 400 - 1700 nm spectral
    sensitivity and high quantum efficiency
  • High efficiency CoaXPress-12
  • GenICam 3.0 and GenTL
  • Two-Point NUC (Non Uniformity Correction)
  • Electrical and optical inputs
  • Integrated 4-channel strobe controller
  • Programmable timer, sequencer and logic functions
  • Dust-free cooled housing
  • Industrial TTL-24V I/O interface
  • RS232 interface
  • 型号和技术参数
正在研发
工程设计样品
可用
已停产
型号 [MP] 分辨率 [像素] 传感器 传感器尺寸 帧速率 [fps] 色饱和度 卡口 接口 可用性
fxo990MCX 1.3 1280 x 1024 IMX990AABJ / Sony 8.2mm (Typ 1/2) 134 SWIR C CXP-12 1 Lane
200
详情 +

Areas of application

The wavelength range of 400 - 1700 nm allows a wide range of applications. Many substances can be identified within this range on the basis of their typical absorption characteristics.

Typical application scenarios can be found, for example, in the solar and electronics industries (inspection of silicon), in the pharmaceutical sector (substance determination, detection of impurities) or in food production (fruit, rot, pressure marks). Even simple detection of water and/or water vapor is easily enabled by SWIR, as well as leakage (with oil/water discrimination). The Multichannel Strobe Controller especially supports substance detection with multiple narrow-band illuminations.

更多信息

您对我们的相机有疑问、需要获得建议或者您想要咨询报价?我们的客户服务专家很乐意为您提供帮助:

取得联系