Camera Link has its advantages regarding data transfer speed, a deterministic timing and very direct access to the imaging sensor itself. Thus, it permits settings and operating modes that are not available with other interfaces. HR series with Camera Link provides a wide range of unique camera core features.
A sophisticated I/O interface provides a rich choice of industrial hardware and software features, including a GenICam multichannel LED strobe control. Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.
HR Series |
hr16050CFLCPC (EOL) |
Resolution [MP] | 16 MP |
Resolution (h x v) | 4896 x 3264 px |
Frame rate (max.) | 10 fps |
Chroma | color |
Interface | Camera Link Medium |
Sensor | |
Sensor | KAI-16050-C |
Manufacturer | ON Semiconductor |
Sensor type | Area CCD |
Shutter type | global shutter |
Sensor architecture | interline transfer |
Readout type | progressive scan |
Sensor size (h x v) | 26.93 x 17.95 mm |
Optical diagonal | 32.36 mm |
Sensor format | APS-H |
Pixel size (h x v) | 5.5 x 5.5 µm |
Camera | |
Exposure modes | MANUAL;AUTO;EXTERNAL |
Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
Exposure time (min) | 20 µs |
Exposure time (max) | 60 sec (external ∞) |
Pixel format / max | bayer8, bayer12 / 12 bit |
Gain modes / max | manual, auto / 18 dB |
S/N ratio (max) | 43 dB (dep. on environment) |
Dynamic range (max) | 61.2 dB (dep. on environment) |
Pixel clock | 48 MHz |
Internal memory | 128 MB SDRAM, 136 MB Flash |
Feature Set | |
Manual white balance | yes |
Automatic white balance | yes |
AOI | yes |
LUT | yes |
Offset | yes |
Binning | yes |
Defect pixel correction | yes |
Tap balancing | manual;auto |
Sequencer | yes |
PIV | yes |
Housing | |
Lens mount | M58x0,75 |
Dimensions (w x h x d) | 70 x 71 x 55.4 mm |
Weight | 420 g |
Ambient temperature | -10 to 45 °C |
Ambient humidity | 10 to 90 % (non-condensing) |
Protection class | IP30 |
I/O-Interfaces | |
Input up to 24V | 2 x |
Output open drain | 2 x |
I/O RS-232 | 1 x |
I/O RS-422 | 1 x |
Power supply | 10 to 25 V (DC) |
Power consumption | 10 W (dep. on operating mode) |
* Sensor data – excludes camera cover- or IR-cut filter characteristics