Camera Link has its advantages regarding data transfer speed, a deterministic timing and very direct access to the imaging sensor itself. Thus, it permits settings and operating modes that are not available with other interfaces. HR series with Camera Link provides a wide range of unique camera core features.
A sophisticated I/O interface provides a rich choice of industrial hardware and software features, including a GenICam multichannel LED strobe control. Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.
HR Series |
hr25000MCL (EOL) |
Resolution [MP] | 25 MP |
Resolution (h x v) | 5120 x 5120 px |
Frame rate (max.) | 31 fps |
Chroma | mono |
Interface | Camera Link 80-Bit |
Sensor | |
Sensor | NOIP1SN025KA-GDI |
Manufacturer | ON Semiconductor |
Sensor type | Area CMOS |
Shutter type | global shutter |
Sensor size (h x v) | 23.04 x 23.04 mm |
Optical diagonal | 32.58 mm |
Sensor format | APS-H (32,58mm) |
Pixel size (h x v) | 4.5 x 4.5 µm |
Camera | |
Exposure modes | MANUAL;AUTO;EXTERNAL |
Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
Exposure time (min) | 21 µs |
Exposure time (max) | 10 sec (external ∞) |
Pixel format / max | bayer8, bayer10 / 10 bit |
Gain modes / max | manual, auto / 18 dB |
Pixel clock | 85 MHz |
Internal memory | 256 MB SDRAM, 160 MB Flash |
Feature Set | |
LUT | yes |
Offset | yes |
Binning | yes |
Image flip | yes |
Shading correction | yes (external) |
Defect pixel correction | yes |
Sequencer | yes |
Housing | |
Lens mount | M58x0.75 |
Dimensions (w x h x d) | 70 x 71 x 78.3 mm |
Weight | 300 g |
Ambient temperature | -10 to 45 °C |
Ambient humidity | 10 to 90 % (non-condensing) |
Protection class | IP40 |
I/O-Interfaces | |
Input up to 24V | 2 x |
Input OPTO | 1 x |
Output open drain | 4 x |
I/O RS-232 | 1 x |
Power supply | 10 to 25 V (DC) |
Power consumption | 10 W (dep. on operating mode) |
* Sensor data – excludes camera cover- or IR-cut filter characteristics