print close Contact

hr65CXGE

HR 10 GigE

The HR 10GigE series with its high-end high-resolution CCD and CMOS sensors permits making full use of the sensor bandwidth. 10GigE delivers up to 1.1 GB/s of image data with distances up to 100m.

The clean design according to well established standards like GigE Vision, 10GigE Vision and GenICam ensure rapid integration into the final application. The camera features a rich choice of industrial hardware and software features. Burst mode enables even higher trigger frequencies.

Best suited for applications such as optical metrology, surface control, quality control or monitoring of large areas.

Technical Highlights

  • >  Defect pixel correction, lens shading correction
  • >  ROI, LUT, binning, gamma, offset, auto exposure
  • >  GenICam interface with GenTL driver
  • >  Integrated multichannel LED strobe controller
  • >  POE (Power Over Ethernet) single cable option
  • >  Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencer and timer, RS232
  • >  M58 lens interface (F-Mount optional)

SVS-Vistek GmbH - Ferdinand-Porsche-Str. 3 - 82205 Gilching - Germany - Telephone +49 8105 3987-60
Information accurate as to: 29.03.2024, errors and omissions excepted.
© 2024 – SVS-Vistek GmbH, all rights reserved.

HR Series

hr65CXGE

Resolution [MP] 65 MP
Resolution (h x v) 9344 x 7000 px
Frame rate (max.) 17.4 fps
Chroma color
Interface 10GigE
(RJ-45)
Sensor
Sensor GMAX3265
Manufacturer Gpixel
Sensor type Area CMOS
Shutter type global shutter
Sensor size (h x v) 29.9 x 22.4 mm
Optical diagonal 37.36 mm
Sensor format 37.4mm
Pixel size (h x v) 3.2 x 3.2 µm
Camera
Exposure modes MANUAL;AUTO
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 62 µs
Exposure time (max) 1 sec
Pixel format / max bayer8, bayer12 / 12 bit
Gain modes manual, auto
S/N ratio (max) 40 dB (dep. on environment)
Dynamic range (max) 65.6 dB (dep. on environment)
Internal memory 512 MB SDRAM, 32 MB Flash
Feature Set
Manual white balance yes
Automatic white balance yes
AOI yes
LUT yes
Offset yes
Binning yes
Image flip yes
Sequencer yes
POE yes (POE+)(optional)
Housing
Lens mount M58x0.75
Dimensions (w x h x d) 70 x 70 x 75.9 mm
Weight 420 g
Operating temperature (housing) -10 to 65 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP30
Filter-/Coverglass IR-Cut 680
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 14 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics


SVS-Vistek GmbH - Ferdinand-Porsche-Str. 3 - 82205 Gilching - Germany - Telephone +49 8105 3987-60
Information accurate as to: 29.03.2024, errors and omissions excepted.
© 2024 – SVS-Vistek GmbH, all rights reserved.