Highest resolution made in Germany
The SHR series combines large pixel structures with the highest resolutions. The physical characteristics of large pixels guarantee outstanding image quality. High-quality harmonization of the pixels with defect pixel correction provides a noise-free image. The camera offers the highest structural precision in sensor adjustment in a massive, thermally highly optimized housing. The large M72 lens mount can be adapted to any lens. This makes the SHR the camera for the most demanding optical tasks.
The high-performance CoaXPress interface enables the fastest high-speed data transfer with excellent latency behavior. The camera is equipped with a comprehensive I/O interface with galvanic interface separation, sequencer and integrated multichannel LED light control.
The SHR offers excellent properties for inspection tasks in the wafer, flat panel or solar panel business. The CoaXPress version provides the benefit of long distance data cables.
SHR Series |
shr461MCX |
Resolution [MP] | 101.8 MP |
Resolution (h x v) | 11648 x 8742 px |
Frame rate (max.) | 8.7 fps |
Chroma | mono |
Interface | CXP-6 with 4 Connections (Din1.0/2.3) |
Sensor | |
Sensor | IMX461LLA |
Manufacturer | Sony |
Sensor type | Area CMOS |
Shutter type | rolling shutter |
Sensor size (h x v) | 43.8 x 32.87 mm |
Optical diagonal | 54.76 mm |
Sensor format | 55mm (Type 3.4) |
Pixel size (h x v) | 3.76 x 3.76 µm |
Camera | |
Exposure modes | MANUAL;AUTO |
Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
Exposure time (min) | 60 µs |
Exposure time (max) | 1 sec |
Pixel format / max | mono8, mono10, mono12, mono16 / 16 bit |
Gain modes / max | manual, auto / 36 dB |
Internal memory | 512 MB SDRAM, 160 MB Flash |
Feature Set | |
AOI | yes |
LUT | yes |
Offset | yes |
Binning | yes |
Image flip | yes |
Shading correction | yes (external) |
Defect pixel correction | yes |
Sequencer | yes |
PoCXP | yes |
Housing | |
Lens mount | M72x0.75 |
Dimensions (w x h x d) | 80 x 80 x 83 mm |
Weight | 580 g |
Operating temperature (housing) | -10 to 70 °C |
Ambient humidity | 10 to 90 % (non-condensing) |
Protection class | IP30 |
Filter-/Coverglass | Borofloat B270i - AR coating |
I/O-Interfaces | |
Input up to 24V | 2 x |
Input OPTO | 1 x |
Output open drain | 4 x |
I/O RS-232 | 1 x |
Power supply | 10 to 25 V (DC) |
Power consumption | 14 W (dep. on operating mode) |
* Sensor data – excludes camera cover- or IR-cut filter characteristics