EXO Camera Link exo183CCL

The EXO with Camera Link interface combines state-of-the-art sensors with the advantages of Camera Link and at the same time offers very direct access to the sensor. Existing and proven infrastructures can also be further expanded in this way. The solid, CNC-milled unibody housing offers excellent temperature management and allows an operating temperature of up to 60°C for most sensors.

Power supply with Power over Camera Link. External power supply is recommended when using the integrated 4-channel LED strobe controller.

Technical Highlights

Thermally optimized aluminium unibody housing
High data rate via Camera Link Base (with PoCL)
Integrated 4-channel LED strobe controller
IO interface with 2xIN, 4xOUT, opto and RS232
with SafeTrigger, programmable timers, logic functions (PLC) and sequencer
Binning, lookup tables, ROI
Up to 60°C operating temperature

Specifications
Resolution [MP]	20.2 MP
Resolution (h x v)	5488 x 3672 px
Frame rate (max.)	12 fps (1X3-1Y) 8 fps (1X2-1Y)
Chroma	color
Interface	Camera Link Base (MDR)
Sensor
Sensor	IMX183CQJ
Manufacturer	Sony
Sensor type	Area CMOS
Shutter type	rolling shutter
Sensor size (h x v)	13.17 x 8.81 mm
Optical diagonal	15.85 mm
Sensor format	1 "
Pixel size (h x v)	2.4 x 2.4 µm
Camera
Exposure modes	MANUAL;AUTO
Trigger modes	INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min)	228 µs
Exposure time (max)	10 sec
Pixel format / max	bayer8, bayer12 / 12 bit
Gain modes / max	manual, auto / 27 dB
S/N ratio (max)	40 dB (dep. on environment)
Dynamic range (max)	71.5 dB (dep. on environment)
Pixel clock	85 MHz
Internal memory	256 MB SDRAM, 32 MB Flash
Feature Set
Manual white balance	yes
Automatic white balance	yes
AOI	yes
LUT	yes
Offset	yes
Binning	yes
Sequencer	yes
Housing
Lens mount	C-Mount
Dimensions (w x h x d)	50 x 50 x 42.7 mm
Weight	140 g
Operating temperature (housing)	-10 to 60 °C
Ambient humidity	10 to 90 % (non-condensing)
Protection class	IP40
Filter-/Coverglass	IR-Cut - 680nm
I/O-Interfaces
Input up to 24V	2 x
Input OPTO	1 x
Output open drain	4 x
I/O RS-232	1 x
Power supply	10 to 25 V (DC)
Power consumption	4 W (dep. on operating mode)