メインコンテンツへジャンプ

EXO GigE exo542MGE

Form follows requirements

With uniform size and standard interfaces comes simple inter­change­ability, allowing the system integrator to easily adapt a solution to varying conditions and requirements - with minimal design effort. SVS-Vistek meets precisely these needs. The EXO series is a perfect match with its uniform form factor and feature set, combined with industry standard interfaces. A solution for virtually every case, allowing smooth and effortless up- or downscaling. Once designed in, the implementations can be varied endlessly.

SVCam EXO series cameras with GigE Vision interface give your applications an extreme scalability. Quick and easy hardware interchangeability results in shorter design cycles and reduced development costs. Further value is added to your application by a virtually limitless feature set. As an example, the 4I/O LED driver with standardized software control.

テクニカル・ハイライト

  • IO interface with 2xIN, 4xOUT, Opto and RS232
  • integrated 4-channel power strobe controller for direct LED control
  • SafeTrigger, programmable timers, logic functions (PLC) and sequencer
  • progressive scan/global shutter sensors
  • POE (Power Over Ethernet) single-cable option
  • Burst mode, ROI, binning, lookup tables
  • SDK for Windows (32/64 bit), Linux
  • GenICam standard with GenTL driver
  • up to 120 MB/s data rate, up to 100m cable length
  • broadcast-safe
exo542MGE
  • 4 integrated LED controllers
  • integrated sequencer
  • safe trigger technology
  • programmable logic control
Specifications
Resolution [MP] 16.1 MP
Resolution (h x v) 5320 x 3032 px
Frame rate (max.) 7 fps
Chroma mono
Interface GigE Vision
(RJ-45)
Sensor
Sensor IMX542LLA
Manufacturer Sony
Sensor type Area CMOS
Shutter type global shutter
Sensor size (h x v) 14.58 x 8.31 mm
Optical diagonal 16.78 mm
Sensor format 16.8mm (Type 1.1)
Pixel size (h x v) 2.74 x 2.74 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 17 µs
Exposure time (max) 10 sec (external ∞)
Pixel format / max mono8, mono12packed / 12 bit
Gain modes manual, auto
Internal memory 256 MB SDRAM, 32 MB Flash
Feature Set
AOI yes
LUT yes
Offset yes
Readout control yes
Binning yes
Image flip yes
Shading correction yes
Defect pixel correction yes
Sequencer yes
POE yes
PTP yes
Housing
Lens mount C-Mount
Dimensions (w x h x d) 50 x 50 x 42.5 mm
Weight 140 g
Operating temperature (housing) -10 to 65 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP40
Filter-/Coverglass K9 - AR coating - 400-850nm
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 4.5 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* センサーデータ - カメラのカバーまたはIRカットフィルター特性を除く

カメラ関連ダウンロード

3D CAD
技術図面
Manuals
アクセサリー
Software
Software Archive
Certificates
Firmware

一般ダウンロード

イメージパンフレット
RMA Form
WhitePaper
Quick Start Manuals
製品概要

オファーと詳細情報

このカメラに関するオファー、ご質問、アドバイスが必要ですか?当社の専門家が喜んでお手伝いいたします:

連絡先