skip to main content

EXO GigE exo273CGE

Form follows requirements

With uniform size and standard interfaces comes simple inter­change­ability, allowing the system integrator to easily adapt a solution to varying conditions and requirements - with minimal design effort. SVS-Vistek meets precisely these needs. The EXO series is a perfect match with its uniform form factor and feature set, combined with industry standard interfaces. A solution for virtually every case, allowing smooth and effortless up- or downscaling. Once designed in, the implementations can be varied endlessly.

SVCam EXO series cameras with GigE Vision interface give your applications an extreme scalability. Quick and easy hardware interchangeability results in shorter design cycles and reduced development costs. Further value is added to your application by a virtually limitless feature set. As an example, the 4I/O LED driver with standardized software control.

Technical Highlights

  • IO interface with 2xIN, 4xOUT, Opto and RS232
  • integrated 4-channel power strobe controller for direct LED control
  • SafeTrigger, programmable timers, logic functions (PLC) and sequencer
  • progressive scan/global shutter sensors
  • POE (Power Over Ethernet) single-cable option
  • Burst mode, ROI, binning, lookup tables
  • SDK for Windows (32/64 bit), Linux
  • GenICam standard with GenTL driver
  • up to 120 MB/s data rate, up to 100m cable length
  • broadcast-safe
exo273CGE
  • 4 integrated LED controllers
  • integrated sequencer
  • safe trigger technology
  • burst mode technology
  • programmable logic control
Specifications
Resolution [MP] 1.6 MP
Resolution (h x v) 1440 x 1080 px
Frame rate (max.) 79 fps
Frame rate burst mode (max.) 168 fps
Chroma color
Interface GigE Vision
(RJ-45)
Sensor
Sensor IMX273LQR
Manufacturer Sony
Sensor type Area CMOS
Shutter type global shutter
Sensor size (h x v) 4.97 x 3.73 mm
Optical diagonal 6.21 mm
Sensor format 1/2.9 "
Pixel size (h x v) 3.45 x 3.45 µm
Camera
Exposure modes MANUAL;AUTO;EXTERNAL
Trigger modes INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min) 19 µs
Exposure time (max) 10 sec (external ∞)
Pixel format / max bayer8, bayer12packed / 12 bit
Gain modes / max manual, auto / 48 dB
Internal memory 256 MB SDRAM, 32 MB Flash
Feature Set
Manual white balance yes
Automatic white balance yes
AOI yes
LUT yes
Offset yes
Readout control yes
Binning yes
Image flip yes
Shading correction yes
Defect pixel correction yes
Sequencer yes
POE yes
PTP yes
Color Transformation Control yes
Housing
Lens mount C-Mount
Dimensions (w x h x d) 50 x 50 x 42.7 mm
Weight 138 g
Operating temperature (housing) -10 to 60 °C
Ambient humidity  10 to 90 % (non-condensing)
Protection class IP40
Filter-/Coverglass IR-Cut - 680nm
I/O-Interfaces
Input up to 24V 2 x
Input OPTO 1 x
Output open drain 4 x
I/O RS-232 1 x
Power supply 10 to 25 V (DC)
Power consumption 4 W (dep. on operating mode)

Dimensions [mm]

Pinout Mating Connector

Pinout

Spectral Response *

Spectral Response

* Sensor data – excludes camera cover- or IR-cut filter characteristics

camera specific downloads

3D CAD
Technical drawings
Manuals
Accessories
Software
Software Archive
Certificates
Firmware

general downloads

Image brochure
RMA Form
WhitePaper
Quick Start Manuals
Product Overviews

Offer and more Information

You would like an offer for this camera, you have questions or you need advice? Our experts will be glad to help you:

Contact