HR Camera Link hr49MCL

Camera Link offers high data rates, deterministic time response and very direct access to the image sensor. This also enables industrial cameras with the highest resolutions, settings and operating modes that are not available with other interfaces.

The clear design, based on established standards (GenICam, GenTL), allows rapid integration into the application. The camera offers a wide range of industrial hardware and software features.

With its high resolutions, the HR series is ideal for surface control, quality control and flat panel inspection.

Technical Highlights

Defect pixel correction
LUT, gamma, offset
ROI and binning (not for: hr49, hr65)
Integrated multi-channel LED strobe controller
Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencer, timer, RS232
Power over Camera Link (PoCL)

Specifications
Resolution [MP]	49 MP
Resolution (h x v)	7008 x 7000 px
Frame rate (max.)	17 fps
Chroma	mono
Interface	Camera Link 80-Bit SDR
Sensor
Sensor	GMAX3265-49
Manufacturer	Gpixel
Sensor type	Area CMOS
Shutter type	global shutter
Sensor size (h x v)	22.43 x 22.4 mm
Optical diagonal	31.7 mm
Sensor format	37.4mm
Pixel size (h x v)	3.2 x 3.2 µm
Camera
Exposure modes	MANUAL;AUTO;EXTERNAL
Trigger modes	INTERNAL;SOFTWARE;EXTERNAL
Exposure time (min)	21 µs
Exposure time (max)	10 sec (external ∞)
Pixel format / max	mono8, mono10 / 10 bit
Gain modes	manual, auto
Internal memory	512 MB SDRAM, 160 MB Flash
Feature Set
LUT	yes
Offset	yes
Shading correction	yes (external)
Defect pixel correction	yes
Sequencer	yes
Housing
Lens mount	M58x0.75
Dimensions (w x h x d)	70 x 70 x 75.9 mm
Weight	420 g
Ambient temperature	-10 to 45 °C
Protection class	IP30
I/O-Interfaces
Input up to 24V	2 x
Input OPTO	1 x
Output open drain	4 x
I/O RS-232	1 x
Power supply	10 to 25 V (DC)
Power consumption	7.8 W (dep. on operating mode)